Skip to main content
Back to Chemistry

THERMODYNAMICS · SOLUBILITY EQUILIBRIUM

Thermodynamics of Dissolving Lab

AP Chemistry

AP CHEMISTRY · CHOOSE WHERE TO START

Why does some salt dissolve better in hot water, and some worse?

Pipette saturated solutions out of water baths, titrate them with HCl to find Ksp, turn a van ’t Hoff graph into ΔH° and ΔS°, and drop seed crystals into solutions to see when dissolving is favored. Pick one lab to turn in, or explore the bench first.

Each lab: Pre-lab → Bench → Data & graph → Claim · Evidence · Reasoning → Test. Your work saves on this device as you go.

About this model

What it calculates. For each salt, Ksp at a temperature T comes from the van ’t Hoff relation ln K = −ΔH°/(RT) + ΔS°/R, with ΔH° and ΔS° treated as constant from 5 to 55 °C (OpenStax Chemistry 2e §16.4). Both salts give Ksp = 4s³, so the molar solubility is s = (Ksp/4)^⅓.

Where the numbers come from. Borax: ΔH° = +110 kJ/mol and ΔS° = +380 J/(mol·K), the “literature values” quoted in general-chemistry borax lab handouts (for example the Chem21Labs borax thermodynamics lab). Note: fitting real solubility tables for borax (U.S. Borax data sheet, 10–50 °C) gives about the same ΔH° (109 kJ/mol) but a smaller ΔS° (about 333 J/(mol·K)). With 380, this ideal model dissolves far more borax than real water does (about 1.6 mol/L at 25 °C instead of about 0.16 mol/kg) and puts ΔG° = 0 near 16 °C instead of near 54 °C, so the bench uses a 2.00 mL pipette and 0.500 mol/L HCl. Calcium hydroxide: ΔH° = −18.7 kJ/mol and ΔS° = −147.5 J/(mol·K), fitted to its solubility from 0 to 60 °C (standard-state tables give about −16.7 kJ/mol and −160 J/(mol·K)).

The titration. Tetraborate takes two H⁺: B₄O₅(OH)₄²⁻ + 2H⁺ + 3H₂O → 4H₃BO₃; bromocresol green turns from blue to green and yellow (3.8–5.4) as boric acid is left. Each Ca(OH)₂ releases two OH⁻; phenolphthalein goes from pink to colorless (10.0–8.2). The flask’s pH is solved from the charge balance (boric acid Ka = 5.4 × 10⁻¹⁰), and the endpoint is the first drop that shows the end color.

What is left out. Ideal solutions (activity = concentration; real ions at 0.5 mol/L are far from ideal), molality treated as molarity, no cooling or crystallizing while the sample is pipetted, no CO₂ taken up by the limewater, and one drop is exactly 0.05 mL. In Lab 3 the seed is watched for one hour of lab time as a time-lapse; a seed shows “no change” when Q is within about 10 % of K. The ions in the magnified view are a schematic, not to scale.

The drawing. The buret scale is correct (0 at the top, read at the bottom of the meniscus); the bath, beaker and flask are not to scale. HCl is colorless; it is tinted pale blue so you can see it.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach always shows your next step and ticks steps off as you work.

The water bath. The clear tank holds a beaker of salt stirred into water, with solid left on the bottom, so the solution is saturated at the bath’s temperature. The circulator’s display shows the temperature, and the thermometer is in the beaker.

The pipette. Pipette draws exactly the volume shown (2.00 mL of borax in Lab 1, 25.00 mL of limewater in Lab 2) of the clear solution with the red pipette filler and drains it into the flask, which already holds 20 mL of water and a few drops of indicator.

The buret. The buret holds HCl. Its scale starts at 0 at the top, so the reading is the volume added; the round loupe magnifies the meniscus. Add HCl with the buttons, then go by drops when the color starts to linger. Press Record endpoint as soon as the color changes.

Lab 3. A test tube of borax solution sits in the bath. Choose a concentration and temperature, predict, then drop in a seed crystal and watch the magnified view.

Keys. P = pipette · A = add 1 mL · D = one drop · R = record endpoint.