Skip to main content
Back to Chemistry

ORGANIC LAB · EXTRACTION + THIN-LAYER CHROMATOGRAPHY

Extraction & TLC Lab

Intro college

INTRO COLLEGE · GOES FURTHER THAN AP CHEMISTRY UNIT 3

Can you pull one compound out of a mixture?

A flask holds benzoic acid and yellow fluorenone dissolved together. Switch the acid’s charge with a base and it moves into water, while fluorenone stays behind. Then prove it worked on a TLC plate. Pick one lab to turn in, or explore the bench first.

Each lab: Pre-lab → Bench → Data & graph → Claim · Evidence · Reasoning → Test. Your work saves on this device as you go.

About this model

Intro college. This lab goes further than AP Chemistry Unit 3 (intermolecular forces, solubility and chromatography) into an organic-lab technique. It reports to your teacher at the AP level.

The extraction. Benzoic acid (pKa 4.20, CRC Handbook) is neutral below its pKa and becomes the benzoate ion above it: the neutral share is 1 ÷ (1 + 10^(pH − 4.2)). Only the neutral molecule dissolves in the organic solvent; the model gives it a partition coefficient of 10 (an illustrative value, not a measured one), so the share in the organic layer is D × V(organic) ÷ (D × V(organic) + V(aqueous)) with D = 10 × the neutral share. Fluorenone has no acidic H and is modelled as staying entirely in the organic layer. One wash, ideal mixing: no emulsions, no solvent dissolving in the water.

Densities (g/mL near 20–25 °C, Murov solvent table, ACS Division of Organic Chemistry): diethyl ether 0.71, ethyl acetate 0.90, dichloromethane 1.33, water 1.00. The less dense layer floats. Water is drawn pale blue so you can see it; in a real funnel it is colourless.

Getting the acid back. 6 M HCl turns benzoate back into benzoic acid, which dissolves only about 3.4 g/L at 25 °C (PubChem), so the rest comes out as a white solid. The model filters at 25 °C and leaves that much dissolved; cooling in ice would recover a little more. Ethyl acetate slowly reacts with strong NaOH; a real procedure keeps that contact short or uses NaHCO₃.

TLC. Silica plates with a 254 nm fluorescent indicator; eluent = hexanes with 0–100 % ethyl acetate. Rf = 1 ÷ (1 + k) with log k falling in a straight line as the share of ethyl acetate rises (the usual “solvent strength” form). The constants are illustrative, chosen so the order (benzoic acid below fluorenone) and the trend are right; they are not measured Rf values, which change with the plate, the chamber and the humidity. Each plate scatters by up to ±0.02 in Rf, as real repeats do. Real benzoic acid streaks unless a little acetic acid is added to the eluent; the model draws a neat spot. The front rises as the square root of time and the jar is shown in time-lapse.

The drawing. Funnel, flasks, jar and bottles are not to scale. The plate and its ruler are to scale with each other.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach always shows your next step, and the next button to press is highlighted.

The funnel station. A pear-shaped separatory funnel sits in an iron ring on a ring stand. It has a stopper on top and a blue stopcock above the stem. The yellow liquid is the organic solvent: fluorenone is yellow. Water is drawn pale blue. The less dense liquid floats. Below are two Erlenmeyer flasks for the two layers. The panel Inside each layer shows the molecules you can’t see: benzoic acid (–COOH), the benzoate ion (–COO⁻ with Na⁺) and fluorenone.

The TLC station. A capped jar holds a shallow pool of eluent below the plate’s pencil origin line. The eluent climbs the white silica plate and carries the spots up. Out of the jar, the ruler’s 0 is at the bottom edge of the plate, and the origin line is at 1.0 cm. Under the UV lamp the plate glows green and the spots show dark. The lanes are listed beside the bench.

The graph beside the bench is drawn from what you have recorded.