Skip to main content
Back to Earth and Space

IMPACT LAB · EARTH IN SPACE

Impact Crater Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

What makes a crater, and what can craters tell us?

Both levels use the same three stations: a classroom flour-and-cocoa drop tray, a planetary impact model built on published crater scaling, and crater counts that compare how old surfaces are.

About this model

① Tray (lab model). A ball dropped from height h hits the flour at v = √(2gh) with kinetic energy E = m·g·h (g = 9.8 m/s², no air drag). An angled drop slides down a frictionless tube from the same height, so it arrives just as fast; only the part of the energy into the flour counts: E·sin²θ, with θ measured from the horizontal (90° = straight down). The crater diameter is D = 0.08 · (E·sin²θ)0.25 · (ball diameter ÷ 2 cm)0.1 metres, the depth is 0.2 D, the ejecta blanket reaches 0.75 D from the centre and the longest ray 1.5 D. These numbers are an illustrative fit, not measured flour data: fit your own class’s drops before trusting them. Below about 15° a crater may be elongated; that is drawn only qualitatively. Ball masses use real densities (maple ≈ 700, glass 2,500, steel 7,850 kg/m³).

Drawing the tray. The stages are timed with real physics: fall √(2h/g), crater growth about √(D/g) (Melosh 1989), ejecta on 45° projectile paths taking √(2s/g). The transient cavity is drawn 1/1.25 of the final width and D/2√2 deep, borrowed from planetary craters; the bowl, rim, rays and grains are pictures, not measurements. Oblique drops put more rays downrange (Gault & Wedekind 1978).

② Planet (published scaling). Collins, Melosh & Marcus (2005), equations 21, 22 and 27, for solid rock (2,700 kg/m³) in the gravity regime: transient diameter Dtc = 1.161 (ρi/ρt)1/3 L0.78 v0.44 g−0.22 sin1/3θ. Simple craters: D = 1.25 Dtc. Complex craters (when Dtc > Dc/1.25): D = 1.17 Dtc1.13 / Dc0.13. Just above the transition that formula gives a slightly smaller crater (0.91 Dc) than the simple rule, so the lab uses whichever is larger: crater size never drops as the impactor grows. The speed is the speed at the surface; the model leaves out the atmosphere, break-up, very small craters in strong rock, ocean targets and multi-ring basins. Earth’s simple-to-complex transition Dc is 3.2 km; for the other bodies the lab scales it as 1/g (Moon ≈ 19 km, Mars and Mercury ≈ 8.5 km), an approximation (observed: Moon 15–20 km, Mars about 5–10 km, Mercury about 10 km). Gravity: NASA fact sheets. Impactor densities: rocky 2,700, iron 7,800, icy comet 600 kg/m³. The cross-section’s depths (simple 0.2 D; complex 0.4 D0.3 km, Collins et al. eq. 28), terraces and central peak are drawn, not computed. A round crater does not prove a vertical impact: most impacts at more than about 15° make round craters.

③ Crater counts. Crater density = number of craters at least the cutoff diameter whose centres lie inside the box ÷ the box area. The model compares two surfaces only when they are on the same body with the same cutoff; then the higher density is the older surface (“retention age”), assuming similar impact rates and preservation, no saturation and no secondary craters. It gives no age in years. The six surfaces are drawn by the lab with illustrative crater numbers (cumulative N(>D) ∝ D−2) in the same order as real counts: lunar highlands > maria > a young flow; Mars southern highlands > northern plains > a young Tharsis flow.

Real craters for scale (rounded): Meteor Crater 1.2 km, Tycho 85 km (some NASA pages give 82 or 102 km), Copernicus 93 km, Chicxulub 180 km (a buried structure). Randomness: only the ray pattern and the drawn crater fields use seeds; every number the lab records comes from the model.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① Tray. Left: the drop tower, a meter stick with the ball’s height and speed. Middle: a pan of flour dusted with brown cocoa, seen from the front. Bright cream = flour thrown out of the crater (ejecta and rays). Right: a true-scale cut-away through the crater’s centre (dashed blue = the transient cavity, the biggest hole before the walls slump). Measure shows the diameter (mint caliper), the depth (rose bracket) and the ray reach (amber dashed line).

② Planet. Left: the surface seen from orbit with a low Sun from the upper left, a scale bar, and dotted rings of real craters for scale. Right: a cross-section (vertically stretched, the label says how much): dashed blue = transient cavity, solid = final crater. ◯ simple bowl, ◎ complex crater with a central peak and terraces.

③ Crater count. A drawn surface with a dashed survey box. Tap each crater whose centre is inside the box and that is at least the cutoff size (the ring around your pointer shows that size). ✓ solid rings are yours; dashed rings were found by Auto-finish. Drag to move the map.

Controls. ▶ drops the ball (or launches the impactor); Step › stops at each stage; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom.