Skip to main content
Back to Earth and Space

PLATE TECTONICS & EARTHQUAKES · SEISMIC WAVES

Earthquake Waves & Earth’s Layers Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Where did the earthquake happen, and what is inside Earth?

Both levels use the same three stations: three seismograph drums you read yourself, a map where your measurements become distance circles, and a cut-away Earth where some waves go missing.

About this model

Two separate models. The seismograms and map use a local model; the cut-away Earth uses a global one. Nothing from one is used in the other.

① ② Local model. A flat 200 × 200 km map, three stations (A, B, C) and three made-up earthquakes at zero depth. P and S travel straight at uniform speeds: P 6 km/s and S 3.5 km/s (the same values as Fault Lines and Seismic Shadow Detective). Arrival time = start time + distance ÷ speed, so S − P = distance × (1/3.5 − 1/6) and distance = 8.4 km for every second of lag. This is not the “8 km per second” rule of thumb, and it is not a real travel-time curve (USGS curves use a layered Earth and source depth). AP Explore adds a made-up faster comparison model (P 8, S 4.5 km/s: 72/7 ≈ 10.29 km per second). All stations share one clock; the unknown start time cancels in S − P.

The traces are synthetic: two fading sine packets starting at the model arrival times. Their size and frequency are invented so the onsets are easy to see; they say nothing about magnitude, attenuation or how the fault moved. A faint background wiggle is drawn under the trace only to look like a real drum record; it is not part of the model and is never used in a check. A pick counts if it is within ±1 s of the model onset; a location counts if every circle passes within 8 km of your marker and the marker is within 8 km of the epicenter. These are teaching rules, not real uncertainties.

③ Global model. A lookup of approximate USGS shadow zones for a shallow earthquake: no direct P from 104° to 140° (both edges included here) and no direct mantle S at 104° or beyond. Real edges depend on source depth and the Earth model. “Missing” means no direct wave in this model: bounced, bent (diffracted) and converted waves can reach shadow zones. P beyond 140° crossed the core. Layer radii 6371 / 3480 / 1220 km; the crust is drawn about eight times too thick. The rays are schematic: curves drawn to show the idea, not a Snell’s-law or PREM calculation, and they don’t set the shadow edges. The pulse timing on the rays is schematic too (S moves at 3.5/6 of P’s pace).

PREM speeds (AP). Six point samples from the Preliminary Reference Earth Model (Dziewonski & Anderson 1981) as tabulated in Purdue EAS 557 Lecture 9: depth 15, 80, 1071, 2891, 3871 and 5671 km. They are speeds at those depths, not averages for whole layers, and they are not fed into the drawn rays. The outer-core sample has S speed 0 km/s (liquid); the inner-core sample has S speed 3.54 km/s (solid), but a direct S wave would have to cross the liquid outer core first.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① Seismograms. Three seismograph drums (stations A ●, B ■ and C ▲) record the same earthquake on a shared clock. Press ▶ and the pen draws 80 seconds of shaking. The small first packet is the P wave; the bigger, later packet is the S wave. Choose ▲ P onset or ◆ S onset, then tap the trace where that packet first starts (drag a marker to fine-tune, or type the time in the boxes). The bracket shows your S−P lag. Zoom the time axis with +/-, Z/X, the scroll wheel or a pinch; drag to slide along it.

② Epicenter map. A 200 km square map with the three stations. Each circle is centred on a station; its radius is your lag × 8.4 km. A ● station has a solid circle, ■ long dashes and ▲ dot-dash. Drag the red ✶ (or use the sliders) to where the circles cross and press Check epicenter.

③ Earth’s interior. A cut-away Earth: crust (drawn thicker), solid mantle, liquid outer core and solid inner core. The earthquake ✶ is at the top. Solid blue lines are P rays; dashed orange lines are S rays, and ✗ marks where S stops at the liquid core. The blue hatched band is the P shadow; the dotted orange band is where no direct S arrives. Drag the green receiver (or use the slider) to any angle; the seismogram on the right shows what it records. ▶ sends wave pulses (● P, ◆ S) along the rays.

Keys: Space play / pause · → step · R reset · Z / X zoom · P / S choose which onset to mark.