Skip to main content
Back to Earth and Space

OBSERVATORY · EARTH IN SPACE

Exoplanet Hunter Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

How do we find planets we can’t see?

Three real planets from the NASA Exoplanet Archive (HD 209458 b, TRAPPIST-1 e, Kepler-186 f) plus Earth as a check. Both levels use the same model. Physics adds the equations: radius from depth, the Doppler shift, minimum mass and tilt, Kepler’s third law and inverse-square starlight.

About this model

Real systems, synthetic observations. HD 209458 b, TRAPPIST-1 e and Kepler-186 f use frozen NASA Exoplanet Archive default records (ps table, retrieved 2026-10-14): period, planet radius, planet mass, star mass, star radius and luminosity, with the original references (Stassun et al. 2017; Agol et al. 2021; Torres et al. 2015). HD 209458’s record leaves its luminosity blank, so the lab works it out from the same record’s star radius and temperature (L = R² × (T ÷ 5772 K)⁴ ≈ 1.76 L☉; published values are about 1.6–1.8 L☉). Kepler-186 f has no mass (so no wobble unless you try a what-if mass). The light curves and wobbles are made by the model from those numbers; they are not telescope data. Earth and the Sun are a Solar System check (NASA fact sheets).

Transits. Box-shaped, central transits of a small dark disk: depth = (Rp/Rs)². No limb darkening, no gradual ingress and egress, no grazing transits, starspots or blended stars. Each reading has random scatter (±100 ppm by default, up to ¼ of the dip: the model needs a clear dip). Radius and period are measured the way the model does it: average every reading below a cutoff halfway down the dip, and time the middle of each dip. Real transits of TRAPPIST-1 e and Kepler-186 f last under 1 % of an orbit, so the dip is drawn wider (at least 3 % of the orbit) and the strip says by how much; the real duration (P/π)·asin(Rs/a) is shown (Seager & Mallén-Ornelas 2003).

Wobble. Circular orbit, planet much lighter than the star: K = (2πG/P)1/3 · m sin i / Mstar2/3. The star recedes (redshift) before mid-transit and approaches (blueshift) after it. The wobble gives m sin i, a minimum mass. Doppler: Δλ = λv/c with c = 299,792 km/s. The spectrum shift and the star’s motion in the System view are magnified (the canvas says how much); every number is the real model value.

Orbits. Kepler’s third law in SI units: a³ = GMP²/(4π²), circular orbits, planet mass ignored. G = 6.674 × 10⁻¹¹ N·m²/kg², Msun = 1.989 × 10³⁰ kg, 1 AU = 1.496 × 10¹¹ m, Rearth = 6,371 km, Rsun = 695,700 km (the site’s values, shared with Kepler’s Laws).

Temperate-zone proxy. 0.95–1.67 AU for a Sun-like star (NASA ExEP 2023 target-list documentation), scaled by √L. It is not a climate model: for cool red stars like TRAPPIST-1 and Kepler-186 it is only approximate. Temperature-aware climate limits (Kopparapu et al. 2013, 2014) move a cool star’s zone outward: for Kepler-186 they run about 0.24–0.46 AU, which puts Kepler-186 f inside the zone near its outer edge (as NASA and Quintana et al. 2014 report), even though the simple proxy puts it just beyond. Being inside a zone never proves water or life. Starlight relative to Earth = L/a².

Pictures. Not to scale in the System view (planet enlarged; star drawn so its edge matches the dip). The Telescope view shows star and planet at their true size ratio; the Zone view shows distances at true scale. Planet surfaces are artist’s impressions made from Solar System Scope maps (CC BY 4.0, based on NASA imagery); star colours come from the archive temperatures. Milky Way: ESO/S. Brunier (CC BY 4.0).

Repeatable. Each set of readings has a seed (shown under Advanced), so the same settings and seed give the same light curve. Tests draw their questions with a seed per attempt.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach beside the scene lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① System. The star and its planet from outside. The bright half of the orbit is the side nearer Earth; the amber part is where the planet passes in front of the star. The red or blue arrow on the star shows its wobble (red = moving away, blue = toward us). Use Tilted / Top / From Earth or drag up and down to move the camera.

② Telescope. What a telescope sees: the star with the planet’s dark silhouette crossing it (true size ratio), the brightness reading, and the star’s spectrum. The dark lines slide right (red) or left (blue) as the star moves; white ticks mark where they would be at rest.

③ Zone. The orbit from above at true scale in AU. The hatched green band is the temperate-zone proxy; orange inside it is the too-hot side, blue outside is the too-cold side. The strip at the bottom compares this star with the Sun on a log scale.

The strip under the scene is the graph the telescope builds as time passes: the light curve (brightness) or the wobble (speed toward or away). The white line is “now”. In Lab 1, click a dip to mark it.

Keys: Space play / pause · → step to the next event · R reset · Z / X zoom.