Skip to main content
Back to Earth and Space

VOLCANOES · PLATE TECTONICS & EARTHQUAKES

Volcanoes & Magma Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Why do some volcanoes pour out lava while others blow apart, and who is in the way?

Both levels use the same three stations: a magma bench, the VEI eruption-size ruler with real event cards, and a hypothetical hazard map with wind and rain.

About this model

What kind of model. Codex’s science core (model.js) with three simple, labelled models. None of them describes a real volcano, forecasts an eruption or says where it is safe.

① Magma bench: an invented index, not viscosity. The relative resistance index R = 2^((silica − 50)/10 + (1100 − T)/100 − dissolved water/2) is a deliberately made-up teaching rule with no units: 1 = basaltic melt at 1100 °C with no dissolved water. Its directions follow real tendencies (more silica → stiffer, hotter → runnier, dissolved water → runnier; USGS), but its weights and exact ratios have no measured calibration. The four styles come from two supplied cut-offs (R ≥ 2 = stiff; retained gas ≥ 1% = gas-rich): effusive, fountaining, dome, explosive. Silica settings 50/60/70% and the four style names match Volcano Forecaster. Water ledger: every amount is a percentage of the initial magma mass: exsolved = initial water × exsolved fraction; escaped = exsolved × escape fraction; kept = exsolved − escaped; dissolved = what is left. Escape is a supplied fraction, not computed from viscosity. Crystals, pressure and solubility, ascent, conduit flow, water–magma explosions and fragmentation are not modelled, and some setting combinations need not be real stable magmas.

② Eruption size: one VEI clue. The volume-only proxy bins bulk explosive tephra using the lower thresholds of Newhall & Self (1982) as shown by USGS: 10⁴, 10⁶, 10⁷, 10⁸, 10⁹, 10¹⁰, 10¹¹ and 10¹² m³ for VEI 1–8. Bins are half-open (a volume exactly on a threshold goes in the higher bin) and 10¹² m³ is VEI 8: a classroom convention. The official VEI also uses plume height, duration and descriptions; VEI is not an energy, damage or forecast scale. Lava, dense-rock-equivalent (DRE) and part-only volumes are rejected. Event cards (USGS, checked 2026-10-22): Kīlauea 2018 ≈ 1.5 km³ of lava (later USGS summary; an early summary gave a smaller lava estimate; the ≈ 0.8 km³ summit collapse is separate); Mount St. Helens, 18 May 1980 ≈ 1.3 km³ of uncompacted ash fall only (reported VEI 5 is separate context); Pinatubo, 15 June 1991 ≈ 10 km³ explosive products, a rounded comparison (reported VEI 6). The cube is just ∛volume.

③ Hazard map: supplied drawing geometry. A hypothetical landscape: vent at (0, 0), x east and y north in km. Lava corridor x 0–8 km, |y| ≤ 1; pyroclastic-current circle r ≤ 5 km; rain-remobilisation (lahar) valley x 0–20 km, |y| ≤ 1; ash sector r ≤ 25 km and ±30° around the bearing the wind blows toward (clockwise from north; weather reports give where wind comes from). Rain on loose deposits is a switch, not a rainfall amount. These are not runout, deposition or terrain calculations; real pyroclastic currents can overtop ridges. Gas, ballistics and landslides are left out. A site with no listed exposure is not a safety clearance, and counts are not risk or casualty numbers.

Repeatable. Every number on the bench is deterministic: the same settings always give the same result. Tests use a seeded draw.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① Magma bench. Left: a volcano cut open. The orange melt fills the magma chamber and the pipe (conduit) to the crater; its colour shows silica and its glow shows temperature. Cyan dots are water still dissolved in the melt; white circles are gas bubbles; grey wisps with ↑ are gas escaping. At the end the crater shows the model tendency. Right: the paddle in the beaker turns slower in stiff melt; the ruler shows the resistance index (log scale, dashed line = the supplied “stiff” cut-off of 2); the water ledger shows dissolved ··· / kept bubbles ○○ / escaped //// as % of the starting magma; the 2 × 2 grid shows the style the two cut-offs give (✓ = this run).

② Eruption size. The stepped blocks are VEI bins on a log ruler: each step on the axis is ×10. The ▼ shows your volume; a ✓ marks its bin. A green bracket is an uncertainty range. The cube has the same volume as your tephra. The event cards are real eruptions with their material: ■ bulk tephra (allowed), ▲ lava or ∴ ash fall only (✗ not allowed on the ruler).

③ Hazard map. A made-up landscape seen from above, north up, with a 5 km grid. ∴ dotted wedge = ash fall (turns with the wind arrow), ▲ chevrons = lava flow, ◎ rings = pyroclastic current, ≈ waves = lahar (only with rain). Houses A–E are sites; after a run each shows a badge for every zone it is in. Tap the map to point the wind.

Controls. ▶ runs the station; Step › moves one beat and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.