Skip to main content
Back to Earth and Space

EARTH MATERIALS · WEATHERING & MASS WASTING

Weathering & Mass Wasting Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Where does a rock go when it weathers, and when does a hillside let go?

Both levels use the same two benches: a 1 kg rock specimen under a rain head (choose the rock, temperature, rain, acidity and freeze/thaw events) and a cross-section of a soil-covered hillside where you change the slope and the water table.

About this model

① Weathering bench. A 1 kg specimen loses intact mass along two competing first-order pathways: a chemical pathway (to the converted/dissolved reservoir) and a physical frost pathway (to detached fragments). The exact exponential solution is used, so intact + fragments + converted/dissolved always equals the starting 1 kg. Every rate is an illustrative teaching number, not a measured weathering rate, and the 0–5000-year range is hypothetical. The chemical rate = rock coefficient × moisture factor P/(P + 500) × 2^((T − 10)/10) (Q10 = 2) × acidity factor 1 + s(7 − pH). The frost rate = rock coefficient × moisture factor × events/20. These rules are invented to show the directions of the effects described in BCcampus Physical Geology §8.3; the acidity factor is not a hydrogen-ion rate law (real pH is logarithmic).

The rocks. Granite here is quartz + feldspar, limestone is calcite-rich, sandstone is quartz grains with silica cement, and shale is fine, clay-rich and bedded. There is no universal ranking of these rock names: different cement, porosity or jointing could change the order. Temperature is an effective liquid-water reaction temperature; freeze/thaw events are set separately and are not worked out from temperature. With no water both pathways stop, but real dry places still weather by heating, salt and living things (not modeled). Fragments stay in the tray and do not weather again; the converted/dissolved value is original-rock equivalent only (no added water, reactants or new clay minerals). No erosion, oxidation, roots or surface-area feedback.

② Slope bench. An infinite-slope model (Chae et al. 2015, Eq. 1, after Hammond et al. 1992): FS = [c′ + (γz cos²β − u) tanφ] ÷ [γz sinβ cosβ], with pore-water pressure u = m γw z cos²β for steady seepage parallel to the slope. The soil is fixed and hypothetical: cohesion c′ = 1 kPa, unit weight γ = 20 kN/m³, depth z = 1 m, friction angle φ = 32°; γw = 9.81 kN/m³. m is the water-table height ÷ soil depth, a water-content proxy, not volumetric water content, and rain does not set it automatically. The soil is not the rock on the weathering bench. FS < 1: modeled resistance is smaller than the driving stress. The 1.3 band edge is a teaching marker, not an engineering standard. No suction, roots, earthquakes, rain soaking in over time, strength loss, slide motion or runout; nothing computes a probability or timing.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① Weathering bench. A 1 kg block of the chosen rock sits on a mesh stand under a rain head (more drops = more rain; the rain is tinted yellow when it is more acidic). As the years pass, the block shrinks with the intact mass. Its corners round and pit as minerals dissolve; cracks open and frost sparkles when there are wet freeze/thaw events. Chips in the tray are detached fragments (still the same rock). The jar on the right fills with the dissolved/converted share. The three bars (solid = intact, dotted = fragments, striped = dissolved) always add up to 1 kg.

② Slope bench. A cross-section of a hillside: grey layered bedrock, 1 m of brown soil (drawn thicker so you can see it) and a highlighted block of soil. The blue band is soil filled with water up to the water table (dashed line). Arrows on the block: orange = pull downhill, green = holding force; small blue arrows = water pressure pushing grains apart. The gauge reads the factor of safety in three bands: ✗ red unstable (below 1), ! yellow near the threshold, ✓ green larger margin. It is not a chance of a landslide.

Controls. ▶ runs the bench; Step › moves exactly one tenth of the run and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.