Skip to main content
Back to Biology

HOMEOSTASIS · NERVE SIGNALS

Neuron & Action Potential Lab

Intro college
File ▾

INTRO COLLEGE · ANATOMY & PHYSIOLOGY

How does a neuron fire?

Stimulate a neuron and record its membrane potential on an oscilloscope. A close-up of the membrane shows the Na⁺ and K⁺ channels opening and closing in step with the trace.

  1. Set up the stimulus under the neuron.
  2. Press ▶ Stimulate and watch the trace.
  3. Record the run, then change one thing and repeat.

Goes further than AP Biology Unit 4 (cell communication) and membrane transport: voltage-gated channels, refractory periods and conduction speed. Algebra only.

Choose where to start:

About this model

A teaching model, not a full simulation. The trace is built from straight-line pieces with representative textbook values (OpenStax Anatomy & Physiology 2e §12.4): rest −70 mV, threshold −55 mV, peak +35 mV, undershoot to −80 mV. Real neurons differ, and a real spike is a smooth curve set by how thousands of channels open and close (the Hodgkin–Huxley equations), which this model does not solve.

Timing. In the model the spike rises for 0.8 ms, falls to its lowest point 2 ms after the stimulus and is back at rest after 5 ms. The absolute refractory period is fixed at 2 ms and the relative refractory period lasts 3 ms more; during it a stimulus of 25 mV or more fires a second spike. Real refractory periods change gradually, not in steps.

Local responses. A stimulus below threshold gives a small bump the size of the stimulus that fades in about 2 ms. Two local responses do not add together here (no summation), and a second stimulus that fails during a refractory period is drawn only as a mark (S2).

Blockers. TTX and lidocaine are shown as blocking every voltage-gated Na⁺ channel. Real lidocaine block depends on the dose and on how often the neuron fires. TTX binds the outer mouth of the channel; lidocaine reaches its site inside the pore.

Conduction speed. The model uses 80 m/s for the myelinated axon and 1 m/s for the unmyelinated axon: examples inside wide real ranges (roughly 3–120 m/s and 0.5–2 m/s). Real speed also depends on axon diameter and temperature. The spike recorded at R2 is the R1 spike delayed by distance ÷ speed.

The membrane close-up. One channel of each kind stands for thousands. The picture is not to scale and leaves out the K⁺ leak channels, Cl⁻ and the large negative ions inside the cell that also set the resting potential. The Na⁺/K⁺ pump (3 Na⁺ out, 2 K⁺ in per ATP) runs all the time; it keeps the gradients and is far too slow to shape one spike.

The neuron picture. Not to scale: a real axon 0.5 m long is about a hundred thousand times longer than its cell body is wide, with thousands of nodes of Ranvier. Myelin on axons outside the brain and spinal cord is made by Schwann cells, as drawn here.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

The neuron (top). Dendrites and the cell body receive signals. The axon hillock is where an action potential starts. The axon carries it to the terminals; the cream segments are myelin, and the gaps between them are nodes of Ranvier. The stimulator depolarizes the axon hillock. R1 records the membrane potential right there; R2 records farther along the axon. An orange glow marks where Na⁺ is entering, violet where K⁺ is leaving.

The membrane close-up (left). The membrane at R1: a voltage-gated Na⁺ channel (orange) with its gate and its inactivation ball, a voltage-gated K⁺ channel (violet), and the Na⁺/K⁺ pump (green). Orange circles are Na⁺; violet squares are K⁺. The words under each protein say whether it is closed, open, inactivated or blocked. The + and − signs show which side of the membrane is positive.

The oscilloscope (right). Membrane potential in millivolts (mV) against time in milliseconds (ms). The dashed line is the threshold (−55 mV); the dotted line is rest (−70 mV). S1 and S2 mark the stimuli. The solid green trace is R1; the dashed blue trace is R2.

Controls. Set the stimulus under the neuron, then press ▶ Stimulate. Step › and the phase buttons jump to each phase of the spike; the Time slider moves anywhere on the trace. The speed menu slows the sweep to 0.1×. Keys: Space stimulate / pause · → step · R clear the trace.