Skip to main content
Back to Biology

BIOMOLECULES · POLARITY AND HYDROGEN BONDS

Water Properties Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Why does water behave so strangely?

Both levels use the same bench: a penny and a dropper, glass tubes in a water trough, three heated cups (water, sand and oil), a beaker on a stir plate, and ice next to liquid water.

About this model

What kind of model. Codex’s science core (model.js) reuses the site’s values: water’s specific heat 4.184 J/(g·K) from Water Works and the Calorimetry Lab, water 0.998 g/mL at 20 °C and g = 9.8 m/s² from Float Factory, and ice 0.917 g/cm³ from Density Dash. Readings are exact model values with no random noise.

① Penny: hypothetical data. The penny’s capacities (0.80 mL for clean water, 0.40 mL with detergent) and the ±5% differences between replicates are made-up apparatus inputs for practising the method. They are not measured penny counts, not calculated from hydrogen-bond strength or surface tension, and not a law for how much detergent does what. Real counts depend on the drop size, the coin, how it is wetted, technique and temperature, and detergent changes how water spreads on the coin as well as its surface tension. After a spill, the volume left on the coin is unknown.

② Tube. Ideal equilibrium (Jurin) height h = 2γ cos θ ÷ (ρ g r) for water at 20 °C (surface tension γ = 0.0728 N/m, OpenStax College Physics 2e Table 11.3) in a long, uniform tube. Only the final height is modelled, not how fast the water climbs. The contact angles are supplied surface properties; the wall names are illustrative. The tube is drawn much wider than real. Tall trees need transpiration and cohesion–tension, not capillarity alone. The height equation is physics enrichment, not something AP Biology asks you to memorize.

③ Heat. ΔT = Q ÷ (m c) for uniform samples with constant specific heat: water 4.184, dry sand 0.845 and vegetable oil 1.7 J/(g·K). The sand and oil values are approximate teaching values from a Concord Consortium heat-transfer experiment; real sand and oil vary with moisture, recipe and temperature. No container heat, evaporation, phase change or heat loss unless you choose “half is lost”. (The Thermal Energy Lab uses 4.186 for water; this lab keeps Water Works’ 4.184.)

④ Dissolve. Named dilute cases only (up to 2 g per 100 g of water near 20 °C, stirred). The 2 g limit is the model’s range, not a solubility limit. Salt gives hydrated Na⁺ and Cl⁻ (ion–dipole attraction); sugar stays as whole molecules hydrogen-bonded to water; oil forms a separate layer (trace solubility and emulsions are left out). Not every polar or ionic substance dissolves.

⑤ Ice. Two separate reference densities compared at equal mass, and the ice’s initial floating depth (fraction under = 0.917 ÷ 0.998). No melting, heat exchange or other ice phases. The zoomed views are schematics of partial charges and hydrogen bonds, not calibrated geometry.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① Penny. A dropper adds water to a copper penny. The dome grows until a drop spills. The counter shows drops added; the circle zooms into the surface: red O and white H atoms, gold dashes for hydrogen bonds, green-headed detergent molecules. The amber banner reminds you these counts are hypothetical. “+1 drop ›” adds exactly one drop.

② Tube. A glass tube stands in a water trough. The ruler reads millimetres from the outside water surface (0). The orange dashed line marks where the water settled. The circle zooms into where water meets the wall and shows the contact angle θ.

③ Heat. Three cups hold equal masses of water (blue), dry sand (grainy tan) and vegetable oil (gold). Identical heater coils glow while heating. All three thermometers use the one scale on the left, so you can compare their heights.

④ Dissolve. A spoonful goes into 100 g of water on a stir plate. The circle shows the particles: Na⁺ (purple) and Cl⁻ (green) with water turned toward them, whole sugar molecules (two rings), or gray oil chains staying apart. ⑤ Ice. Equal masses of liquid water and ice in cylinders, then ice floating in a beaker; the circles compare ice’s open lattice with the liquid.

Controls. ▶ runs the station; Step › moves one quarter (or one drop) and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.