Skip to main content
Back to Physics

PHYSICS · FORCES AND COLLISIONS

Egg-Drop Collision Design Lab

Foundations

Can you drop an egg 3 meters without breaking it?

You will drop an egg in a box from a tower. When the box hits the ground, the ground has to stop it, and that takes a push (a force). Find out how padding, a parachute and soft ground change that push, and design a box that keeps the egg safe.

  1. Set up the box
  2. Drop it from the tower
  3. Record what you measure
  4. Explain it, then take the test

Your teacher may tell you which lab to do. Each lab takes about 15 minutes.

What am I looking at?

  • The drop tower (left): the yellow tape measures the drop height in meters (m), from the ground up. The red pin on the arm lets go of the box.
  • The box is drawn cut open so you can see the egg and the padding inside. It is drawn much bigger than it would be next to a real 5 m tower.
  • The zoom: a close-up of the egg at the moment it lands. The blue arrow is the padding pushing up on the egg. The orange arrow is the egg pushing down on the padding. They are always the same size.
  • The stop picture (graph): how hard the egg is pushed while the box stops. A tall, thin bump is a quick stop with a big push. A low, wide bump is a slow stop with a small push. The red dashed line is where the model egg cracks.
  • Drop no.: each time you drop the same design again, it gets the next drop number. Each landing is a little different (the box tips a bit), like a real test.

Words to know

  • Force: a push or a pull. We measure it in newtons (N). An egg weighs about 0.6 N; a large apple about 2 N.
  • Stopping time: how long the box takes to stop after it touches the ground, in milliseconds (ms). 1,000 ms = 1 second.
  • Force pair: when two objects push on each other, both pushes are the same size and point opposite ways. Each push acts on a different object.
  • Criteria: what a design must do (keep the egg safe). Constraints (limits): rules it must follow (120 g or less, $3.00 or less).
  • Trial: one test drop. Repeating trials shows whether a design works every time.

About this model

Model: this is a teaching model, not a prediction for a real egg.

  • A 60 g egg falls from rest, with gravity 9.8 m/s² and no air push unless the parachute is on. Its landing speed comes from the drop height.
  • The parachute is open from the start and lets the box fall no faster than 2.5 m/s.
  • Padding and the landing surface each add a made-up stopping time (for example, foam adds 60 ms). Real materials vary.
  • The push on the egg rises and falls in one smooth bump. For the same landing speed, a longer stop spreads the egg’s stop out, so the biggest push is smaller.
  • The model egg cracks if the biggest push is more than 80 N. Real shells are different: it depends on how the egg is turned and where it is touched.
  • Each repeat drop changes the stopping time a little (up to about 10%), to stand for small differences in how the box lands. The box never bounces.
  • The zoom shows the force pair between the egg and the padding. The box and the ground are a different pair: the box pushes the ground, and the ground pushes the box, also equal and opposite.
  • Masses and costs: egg 60 g; box 15 g and $0.30; crumpled paper 20 g and $0.40; foam 35 g and $1.20; parachute 10 g and $1.00.