Skip to main content
Back to Physics

ELECTRICITY & MAGNETISM · CHARGE, FIELDS AND VOLTAGE

Electric Fields & Charge Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Charges, forces, fields and voltage

Every level uses the same four stations: an electroscope you charge by rubbing, touching or induction; two charged spheres on a force sensor; a field-and-voltage map around point charges; and a pair of parallel plates with a battery.

About this model

What kind of model. Codex’s science core (model.js): held point charges in a vacuum, with k = 8.99 × 10⁹ N·m²/C² (the rounding Static Shock Shop uses) and ε₀ = 8.8541878188 × 10⁻¹² F/m (CODATA 2022). Because k is rounded, 1/(4πk) differs from ε₀ by about 0.03%. There is no conductor-surface solver, no dielectric and no air: real charges leak away, especially in humid air.

① Electroscope. A charge ledger, not a leaf-angle model. Rubbing moves 4 units of charge (electrons) between the rod and the cloth: rubber gains electrons from fur, glass loses them to silk. A nearby rod polarizes the electroscope without changing its net charge. Grounded with the rod near, the ledger sets the electroscope to one unit opposite to the rod. Touching shares charge equally, as two equal spheres would. How far the leaves spread and where the charge sits are drawn qualitatively. The units are ledger units, not coulombs.

② Coulomb force. F = k|q₁q₂|/r² between two point charges, r centre to centre. The spheres are drawn larger than they would be at this scale. Force arrows grow with the logarithm of the force so the whole range shows.

③ Field & voltage map. E = Σ kQ r̂/r² (arrows add as vectors) and V = Σ kQ/r relative to infinity (numbers add). The dipole is +q at x = −0.20 m and −q at +0.20 m; the like pair is two charges at ±0.20 m. The test charge stays at least 4 cm from a source, because a point charge has no finite field at its centre. The voltage shading and the violet equipotentials (±10 V to ±2000 V) are drawn from the same V.

④ Plates. Large parallel plates in a vacuum with no edge effects: C = ε₀A/d, Q = CV, E = V/d, energy ½QV. “Battery” holds V; “isolated” holds Q. In the labs the isolated plates were charged at 12 V across 1.0 mm, then disconnected; in Explore, opening the switch traps whatever charge the battery had put there. The gap is drawn enlarged. The AP grain (1 mg, launched up at 1 m/s from the middle) moves by a = qE/m with no gravity or air. FLAG: a real 1 mg grain would also fall at 9.8 m/s², which is about the same size as its sideways acceleration here (12 m/s² at 12 V across 1 mm), so this is a teaching model of the sideways push only. It is not relativistic, and the model does not stop it at the plates, so the page ends its path where it meets one.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

Colours and signs. Red discs with + are positive charge; blue discs with − are negative (small blue dots are electrons on the move). Gold arrows show the electric field E; thick green arrows show forces F. Violet lines join points with the same voltage, and each is labelled with its voltage.

① Electroscope. A metal knob, rod and two gold leaves in a glass jar. Choose an action and press ▶ Do it: rub the rod, bring it near, touch the knob with a finger (ground), and so on. The ledger in the corner counts the charge on everything; it always adds up to zero once you count the ground.

② Coulomb force. Two charged spheres on clear stands along a metre stick. Sphere 1 hangs from a force sensor. Choose a separation and press ▶ Measure.

③ Field & voltage map. Looking down on the charges. Red shading means positive voltage, blue negative. The small disc is your test charge: its gold arrow is the field there, its green arrow the force on it.

④ Plates. Two metal plates seen edge-on: + plate on the left, − on the right, battery and switch below, voltmeter above. The gap is drawn enlarged.

Controls. ▶ runs the station; Step › moves a quarter of the way and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.