Skip to main content
Back to Physics

LIGHT AND ELECTRONS · THE PHOTON MODEL

Photoelectric Effect Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Can light knock electrons out of a metal, and what decides how fast they fly?

Both levels use the same bench: a lamp you can tune from infrared to ultraviolet, an evacuated photocell with five metals to choose from, a power supply and an ammeter.

About this model

What kind of model. Codex’s science core (model.js): Einstein’s photon model of the photoelectric effect in an evacuated photocell. Every number is an exact model value with no random noise, so repeating a run gives the same numbers and does not estimate real measurement error.

The physics. One photon gives all its energy E = hf to one electron. An electron escapes only if hf ≥ φ (the work function); the fastest leave with Kmax = hf − φ, and the stopping voltage satisfies e·Vs = Kmax. At exactly the threshold, emission is allowed with Kmax = 0. Below it there is no emission at all, so those rows have no kinetic energy (shown as —, never as 0) and are left out of line fits. Constants: h = 6.626 × 10⁻³⁴ J·s, c = 2.998 × 10⁸ m/s, e = 1.602 × 10⁻¹⁹ C (NIST CODATA values, rounded as in the site’s Atomic Spectra Lab).

Work functions. Na 2.46, Zn 4.31, Cu 4.70, Pt 6.35 eV (OpenStax University Physics 3, Table 6.1); K 2.30 eV (HyperPhysics photoelectric table). Work functions depend on the surface (crystal face, oxide, contamination), and other tables list different values, especially for Na and K. Treat these as one supplied specimen table, not universal constants.

Apparatus (hypothetical). Plate area 1 cm², quantum efficiency 0.1 (one photon in ten frees an electron), photon rate = intensity × area ÷ hf, current = e × efficiency × photon rate. The efficiency is the same at every frequency here; real efficiencies vary. Between 0 V and −Vs the current falls in a straight line because the model spreads electron energies evenly from 0 to Kmax; real collection curves are rounder. Only the stopping point is model-independent. Not modelled: contact potentials between the electrodes, space charge, thermal (heating) emission, multi-photon absorption, reflection from the plate.

On screen. Each drawn photon packet stands for very many photons; every tenth one that lands frees a drawn electron (the efficiency), with an energy between 0 and Kmax. UV and IR light are invisible; the beam is drawn in a stand-in colour with a dashed outline. In Labs 1 and 2 the supply sweeps the collector from +1 V to −Vs after the exposure, so you see the current stop. Light colours for wavelengths are a display approximation.

Next to other labs. The Atomic Spectra Lab is about light given off by atoms (line spectra). This lab is about light freeing electrons from a metal: threshold, intensity vs photon energy, and stopping voltage.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

The bench. Left: the lamp and monochromator; its beam is drawn in the light’s colour (ultraviolet and infrared are invisible, so they are drawn dashed). Centre: a glass vacuum tube. The curved metal plate on the right is the emitter; light passes the thin rod on the left, the collector, and lands on the plate’s hollow face, the side electrons leave from. Wavy packets are photons (more wiggles = higher frequency = more energy). Blue balls with a minus sign are electrons. Arrows between the plates show the push on an electron: green toward the collector, red back toward the emitter.

Meters. The power supply shows the collector’s voltage minus the emitter’s. The ammeter shows the current from electrons that reach the collector, in microamps (µA). Right panel: the energy for one electron: the photon’s energy hf (coloured bar) next to the escape cost φ (grey) plus what is left over, Kmax (gold). A red dashed line is the energy barrier e|V| from a negative collector.

Controls. ▶ Shine light runs one exposure; Step › moves a quarter of the run and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.