Skip to main content
Back to Physics

MOTION & FORCES · ROTATION

Rotation & Torque Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

What makes things turn, and what keeps them turning?

Both levels use the same five stations: a wrench on a bolt, a meter-stick balance, a spin-up rig, a rolling race down a ramp, and a turntable with sliding masses.

Your teacher may have chosen a level for you. Each level keeps its own saved work.

About this model

What kind of model. Codex’s science core (model.js) with the relationships from OpenStax College Physics 2e §§9.2 and 10.3–10.5 and the AP Physics 1 Course and Exam Description (Units 5–6). Every number is an exact model value with no random noise, so repeating a run gives the same numbers and does not estimate real measurement error. g = 9.8 m/s². Bodies are rigid and ideal, and every axis is stated. Shape inertias are supplied (not something to memorize).

① Wrench. τ = r F sin θ, with θ measured from the handle (the outward radius) to the force, counterclockwise positive. The bolt is held, so the force is applied slowly (quasistatic) and nothing spins: the station shows torque, not motion.

② Meter stick. A uniform 1 m stick, horizontal, on a fixed pivot; positions are measured from the left end. Loads hang straight down; the stick’s weight acts at 50 cm; the pivot supplies the upward force. The tilt to ±12° stops is only a display of which way the net torque turns the stick (no swinging dynamics).

③ Spin-up. Constant net torque on a body starting at rest: α = Στ / I, ω = α t, angle = ½ α t². Axes: hoop, disk and solid sphere through the center; rod perpendicular through its center or one end. Size means radius, or the full rod length. No friction at the axle.

④ Rolling race. Rolling without slipping from rest, with enough static friction (the “minimum μs” readout says how much the model assumes) and no rolling loss, air drag or heating: m g h = ½ m v² + ½ I ω², v = ω R, a = g sin θ / (1 + β). Slopes 5–40° only. The rolling and energy stations extend Unit 5 into Unit 6.

⑤ Turntable. Two identical point masses move symmetrically along a track on a rigid turntable with a frictionless bearing: no outside torque, so L = I ω is conserved, with I = I_turntable + 2 m r². Pulling the masses in does internal work, so rotational kinetic energy is not conserved. How fast the masses slide is a display choice; only the start and end states are model values. Angular momentum is AP Physics 1 Unit 6.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

① Wrench. A wrench grips a hex bolt (left). The orange arrow is your force; θ is its angle from the handle. After the push, the gray dashed line is the force’s line of action, the gold line is the lever arm (the perpendicular distance from the bolt to that line), the green arrow is the part of the force that turns the bolt, and the blue curved arrow is the torque.

② Meter stick. A wooden meter stick on a triangular pivot, with brass masses hanging from it. The purple arrow is the stick’s own weight at 50 cm; the green arrow is the pivot pushing up. Release tips the stick toward the side with more torque, or it stays level.

③ Spin-up. The shape turns about a pin through the screen. The blue curved arrow is the applied torque; the dot on the shape lets you count turns.

④ Rolling race. A ramp seen from the side; the body rolls down to the finish line on the right. With “Race the other two shapes too”, the dashed outlines are the other shapes released at the same moment.

⑤ Turntable. Seen from above. Two orange masses ride a track; the pink arrows show the inward pull while they slide. The rings mark 0.2, 0.4 and 0.6 m from the axis.

Controls. ▶ runs the station; Step › moves one quarter and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.