Skip to main content
Back to Physics

WORK & ENERGY · SIMPLE MACHINES AND POWER

Work, Power & Machines Lab

File ▾

CHOOSE YOUR INVESTIGATION LEVEL

Less force, more distance, and where the energy goes

Every level uses the same five stations: a lever on a fixed pin, pulleys from one fixed wheel to a six-strand block and tackle, a ramp you push a crate up, a wheel and axle, and a winch motor hoisting a crate.

About this model

What kind of model. Codex’s science core (model.js), with g = 9.8 m/s² and the work, power and efficiency helpers shared with Work & Power Gym. Every machine is steady (the load rises at constant speed) and massless: no rope stretch or slip, no inertia, no stored energy, no starting, stopping or return stroke. Useful output is the load’s gain in gravitational energy, mgh; at constant speed the net work on the load is zero.

① Lever. An ideal 1.2 m bar on a fixed pin, starting horizontal, with vertical effort and load forces (effort down for class 1, up for classes 2 and 3). The rulers show the vertical displacement of each point, not arc length; the output stroke is at most half the load arm (≤ 30°). Torques are for the starting, horizontal bar. The pin can push up or pull down (a class 3 lever needs it to pull down). Bench geometry: class 1 has its pivot between the ends with effort arm a and load arm 1.2 − a; classes 2 and 3 have the pivot at one end with the outer point at 1.0 m.

② Pulleys. Only Codex’s 1 / 2 / 4 / 6 vertical supporting strands. The IMA is the number of supporting strands, not wheels. With η = 1 every strand carries mg/n; with a supplied η < 1 the effort is an overall steady relation and the strands do not all carry the same tension.

③ Ramp. The crate slides steadily up with the push parallel to the slope: N = mg cos θ, kinetic friction f = μk N (the simple Coulomb model), effort = mg sin θ + f. Losses come from μk, not from a separate efficiency setting. The push acts along L; the useful output uses the rise h. The μk values are hypothetical teaching values, not measured materials.

④ Wheel and axle. Effort tangent to the rim, load rope wound on the axle; both turn through the same angle, so IMA = R/r. Constant radii (no rope build-up), no slip, no wheel inertia.

⑤ Motor hoist. The rating is mechanical power at the machine’s input, not electrical power. The motor also has a hard force cap and an optional input-speed cap: v in = min(P / F in, cap). If the hoist needs more force than the cap, or the power is 0, nothing lifts and the lift time is null (not infinite, not zero). The energy-only bound W in / P is a lower limit, not a promise. Unused rating is simply not transferred; electrical current, heating, motor torque–speed curves and duty cycles are not modelled.

Efficiencies. The η values (0.90, 0.75, 0.50) are hypothetical supplied numbers for a whole device, not measured bearing or rope data, and not a rule that more wheels means more loss. An efficiency above 100 % in a measured record means a reading or the system boundary is wrong; it is never energy creation.

What am I looking at?

How the lab works. Pick Explore or one lab at the top. Each lab has five tabs: Pre-lab, Bench, Data & graph, Claim · Evidence · Reasoning, and Test. On the Bench, the coach lists your steps; they tick themselves as you work. Press What do I do now? when you’re stuck.

Arrows. Orange = your effort (input force). Blue = the load’s weight mg. Purple = the pin’s push or pull on the lever. Teal = the ramp’s normal force. Red = kinetic friction. Each arrow carries its value. Gold dashed rulers show how far a point moves vertically; the box at the top right is the energy ledger: input work, useful mgh and other paths (hatched).

① Lever. A plank on a pin bolted to the bench. The crate sits on the bar; the dashed line is where the bar started. ② Pulleys. The numbered ropes are the supporting strands; the rope on the far right is the one you pull (red tape marks scroll as it moves). ③ Ramp. L is the slope you push along, h the height you lift; the shimmer is thermal energy from friction. ④ Wheel and axle. The orange dot on the rim traces your input path; the rope winds onto the small axle. ⑤ Motor hoist. The three dials keep the rated power, the power actually transferred and the useful power apart; the lamp says lifting, off or blocked.

Controls. ▶ runs the machine; Step › moves a quarter of the way and pauses; the speed menu slows it to 0.1× or 0.05×. Keys: Space play / pause · → step · R reset · Z / X zoom. Drag to move a zoomed-in scene.